Cisco Systems MPR-151 manual Task ID Examples Operations, MPR-176

MPLS Forwarding Commands on Cisco IOS XR Software

show mpls traffic-eng fast-reroute log

Task ID

Examples

Task ID	Operations
mpls-te	read

The following is sample output from the show mpls traffic-engfast-reroute log command: RP/0/RP0/CPU0:router# show mpls traffic-eng fast-reroute log

Node	Protected	LSPs		Rewrites When		Switching Time
	Interface					(usec)
-------- ---------		-----		-------- ---------------------- --------------
0/0/CPU0 PO0/1/0/1		1		1	Feb 27 19:12:29.064000	147
0/1/CPU0 PO0/1/0/1		1		1	Feb 27 19:12:29.060093	165
0/2/CPU0 PO0/1/0/1		1		1	Feb 27 19:12:29.063814	129
0/3/CPU0 PO0/1/0/1		1		1	Feb 27 19:12:29.062861	128
Table 44 describes the significant fields shown in the display.
Table 44	show mpls traffic-eng fast-reroute log Field Descriptions
Value			Description
Node			Node address.
Protected Interface			Type and interface-id that is being protected.
LSPs			Link-state packet (LSP) associated with each interface being protected.
Rewrites			Number of rewrites initiated on the LSP.
When			Date the interface was protected.
Switching Time			Time required to switch the protected interface in micro-seconds.

Related Commands	Command	Description
	show mpls traffic-engfast-reroute database	Displays the contents of the FRR database.

Cisco IOS XR Multiprotocol Label Switching Command Reference

MPR-176