MPLS Forwarding Commands on Cisco IOS XR Software
show mpls label range
show mpls label range
Syntax Description
Command Modes
Command History
To display the range of local labels available for use on packet interfaces, use the show mpls label range command in EXEC mode.
show mpls label range
This command has no arguments or keywords.
EXEC
Release | Modification |
Release 2.0 | This command was introduced on the Cisco |
|
|
Release 3.0 | No modification. |
|
|
Release 3.2 | This command was supported on the Cisco XR 12000 Series Router. |
|
|
Release 3.3.0 | No modification. |
|
|
Usage Guidelines |
| To use this command, you must be in a user group associated with a task group that includes the proper | |
|
| task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on | |
|
| Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide. | |
|
| You can use the show mpls label range command to configure a range for local labels that is different | |
|
| from the default range. |
|
|
|
|
|
Task ID |
| Task ID | Operations |
|
|
|
|
|
| read, read, read | |
|
|
| |
|
| The following is sample output from the show mpls label range command: | |
Examples |
| ||
|
| RP/0/RP0/CPU0:router# show mpls label range | |
|
| Range for dynamic labels: Min/Max: 16/1048575 | |
Table 39 describes the significant fields shown in the display.
|
| Table 39 | show mpls label range Field Descriptions | ||
|
|
|
|
|
|
|
| Field |
| Description | |
|
|
|
|
| |
|
| Range for dynamic labels | Minimum and maximum allowable range for local labels (which | ||
|
|
|
| differs from the default range). | |
|
|
|
|
|
|
|
|
|
|
|
|
Related Commands |
| Command |
| Description |
|
|
|
|
|
| |
|
| mpls label range | Configures a range of values for use as local labels. | ||
|
|
|
|
|
|
Cisco IOS XR Multiprotocol Label Switching Command Reference
