MPLS Forwarding Commands on CiscoIOS XR Software
show mpls lsd clients
MPR-169
Cisco IOS XR Multiprotocol Label Switching Command Reference
show mpls lsd clients
To display the MPLS clients connected to the MPLS Label Switching Database (LSD) server, use the
show mpls lsd clients command in EXEC mode.
show mpls lsd clients
Syntax Description This command has no arguments or keywords.
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
MPLS clients include Traffic Engineering (TE) Control, TE Link Management, Label Distribution
Protocol (LDP), and Bulk Content Downloader (BCDL) Agent. Not all clients are applications (see the
show mpls lsd applications command), but all applications are clients.
Task I D
Examples The following is sample output from the show mpls lsd clients command:
RP/0/RP0/CPU0:router# show mpls lsd clients
Id Services Node
-- -------------------- ------------
0 BA(p=none) 0/0/CPU0
1 A(TE-Link) 0/0/CPU0
2 A(LDP) 0/0/CPU0
3 A(TE-Control) 0/0/CPU0
Release Modification
Release 2.0 This command was introduced on the CiscoCRS-1.
Release 3.0 No modification.
Release 3.2 This command was supported on the CiscoXR 12000 Series Router.
Release 3.3.0 No modification.
Task ID Operations
mpls-te or mpls-ldp or mpls-static read, read, read