MPLS Forwarding Commands on CiscoIOS XR Software
show mpls lsd applications
MPR-167
Cisco IOS XR Multiprotocol Label Switching Command Reference
show mpls lsd applications
To display the MPLS applications registered with the MPLS Label Switching Database (LSD) server,
use the show mpls lsd applications command in EXEC mode.
show mpls lsd applications
Syntax Description This command has no arguments or keywords.
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
MPLS applications include Traffic Engineering (TE) Control, TE Link Management, and Label
Distribution Protocol (LDP). The application must be registered with MPLS LSD for its features to
operate correctly. All applications are clients (see the show mpls lsd clients command), but not all
clients are applications.
Task I D
Examples The following is sample output from the show mpls lsd applications command:
RP/0/RP0/CPU0:router# show mpls lsd applications
Type State RecoveryTime Node
------------ -------- ------------ ------------
LDP Active 300 0/0/CPU0
TE-Control Active 100 0/0/CPU0
TE-Link Active 600 0/0/CPU0
Release Modification
Release 2.0 This command was introduced on the CiscoCRS-1.
Release 3.0 No modification.
Release 3.2 This command was supported on the CiscoXR 12000 Series Router.
Release 3.3.0 No modification.
Task ID Operations
mpls-te or mpls-ldp or mpls-static read, read, read