MPLS Forwarding Commands on CiscoIOS XR Software
show mpls traffic-eng fast-reroute database
MPR-171
Cisco IOS XR Multiprotocol Label Switching Command Reference
show mpls traffic-eng fast-reroute database
To display the contents of the fast reroute (FRR) database, use the show mpls traffic-eng fast-reroute
database command in EXEC mode.
show mpls traffic-eng fast-reroute database [ip-address | ip-address mask | afi-all [safi-all
{ip-address | ip-address mask}] | [unicast {ip-address | ip-adddress mask}] | backup-interface
[tunnel tunnel ID [summary] | unresolved] | interface interface [summary] | ipv4 [safi-all
{ip-address | ip-adddress mask}] | [unicast {ip-address | ip-adddress mask}] | labels number
[number [state [active | complete | partial | ready]] | [location node-id] | role [head
[summary] | midpoint [summary]] | state [active | complete | partial | ready]] | summary]
Syntax Description
Command Modes EXEC
ip-address (Optional) IP address of the destination network.
ip-address mask (Optional) Bit combination indicating the portion of the IP address that is
being used for the subnet address.
afi-all (Optional) Returns data for all specified address family identifiers.
safi-all (Optional) Returns data for all sub-address family identifiers
unicast (Optional) Returns unicast data only.
backup-interface (Optional) Displays entries with the specified backup interface.
tunnel tunnel-id Tunnel and tunnel ID to which packets with this label are going. The
summary suboption is available.
unresolved (Optional) Displays entries whose backup interface has not yet been fully
resolved.
interface (Optional) Displays entries with this primary outgoing interface. The
summary suboption is available.
ipv4 (Optional) Displays IPv4 data only.
labels (Optional) Displays database entries that possess in-labels assigned by this
router (local labels). Specify either a starting value or a range of values. The
state suboption is available.
location node-id (Optional) Displays hardware resource counters on the designated node. The
node-id argument is entered in the rack/slot/module notation.
role (Optional) Displays entries associated either with the tunnel head or tunnel
midpoint. The summary suboption is available.
state (Optional) Filter the database according to the state of the entry:
active—FRR rewrite is in the forwarding active database (where it can be
placed onto appropriate incoming packets).
complete—FRR rewrite is assembled, ready or active.
partial—FRR rewrite is fully created; its backup routing information is still
incomplete.
ready—FRR rewrite was created but is not in the forwarding active state.
summary (Optional) Displays summarized information about the FRR database.