Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Understanding Interactions with Other Cisco Unified IP Communications Products
Understanding How the Cisco Unified IP Phone Interacts with the VLAN
The Cisco Unified IP Phones 7975G,
If a computer is connected to the access port, the computer and the phone share the same physical link to the switch and share the same port on the switch. This shared physical link has the following implications for the VLAN configuration on the network:
•The current VLANs might be configured on an IP subnet basis. However, additional IP address might not be available to assign the phone to the same subnet as other devices connect to the same port
•Data traffic present on the data/native VLAN may reduce the quality of
•Network security may indicate a need to isolate the VLAN voice traffic from the VLAN data traffic
You can resolve these issues by isolating the voice traffic onto a separate VLAN. The switch port that the phone is connected to would be configured to have separate VLANs for carrying:
•Voice traffic to and from the IP phone (auxiliary VLAN, on the Cisco Catalyst 6000 series, for example)
•Data traffic to and from the PC connected to the switch through the access port of the IP phone (native VLAN)
Isolating the phones on a separate, auxiliary VLAN improves the quality of the voice traffic and allows a large number of phones to be added to an existing network where there are not enough IP addresses for each phone.
For more information, refer to the documentation included with a Cisco switch. You can also access related documentation at this URL:
http://cisco.com/en/US/products/hw/switches/index.html
Related Topics
•Understanding the Phone Startup Process, page
•Network Configuration Menu, page
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5
|
| ||
|
|
