Starting Your Installation

6

Before You Start Installation

BEFORE YOU START INSTALLATION

UNPACKING AND CHECKING CONTENTS

As you unpack the system, confirm that all the parts are included. See Package Contents below for a list of the included components.

Note: Keep the shipping materials in which these items are packed, in case you ever need to return them.

Unpack the contents carefully. Electronic equipment can be easily damaged if bumped or handled roughly. Examine all parts for damage that may have occurred during shipment. If you find any damage, immediately call the location where your system was purchased, or the Service Center, before continuing with installation.

PACKAGE CONTENTS

User and Installation Guide

Satellite antenna assembly (this includes the LNBF, the support arm, the dish, the mounting bracket, the mast, and related hardware; see Components of the Satellite Antenna on page 6-4, supplied with HM-DSR100DU)

Recorder with built-in receiver

Remote control, with four (4) AAA batteries packaged separately

Cables:

25 foot RJ-11 telephone cable

8 foot phono (RCA) 3-connector cord

6 foot RF or VHF cable

Ultra-high frequency (UHF) antenna for UHF remote

Note: Additional hardware is required for installation. See What You Need on page 6-6. An optional Installation Kit is available, which includes many of these items.

See Optional Installation Kit on page 6-7. Contact the location where your system was purchased for more information, or call the Service Center for the location of a licensed dealer near you.

Page 6-3

Page 129
Image 129
JVC HM-DSR100U, HM-DSR100DU, HM-DSR100RU manual Starting Your Installation, Before YOU Start Installation