VCR Features | 5 |
Using Caller ID |
8. Select the Save option.
Save
9.If you have not already done so, call your telephone company to activate caller ID.
When the recorder detects an incoming call, it displays an
♦If you receive a telephone call while you are watching a program or using the Browse Banner, the recorder displays a message similar to the following at the bottom of your TV screen:
Jane Doe
OK
♦If you receive a telephone call while you are using a menu or the Program Guide, the recorder displays a message similar to the following:
Attention
Incoming call:
Name: Jane Doe
Phone:
OK
To clear either of these messages from your TV screen, press the Select button on the remote control, or press the Cancel button. If you wish, you may simply wait a few sec- onds for the recorder to remove the message.
The recorder will not display a Caller ID message on the screen while you are recording a program for which you set up a VCR Event Timer. However, it will display such a message if you are simply recording a program.
Page
