JVC HM-DSR100U, HM-DSR100DU, HM-DSR100RU manual User and Installation Guide

User and

Installation Guide

DISH SIGNAL DIAGNOSTIC TEST

This test verifies that your system has good signal reception.

Select the Dish Signal option to begin the test. The recorder displays a message asking you to wait until the test is completed. If the system signal reception is normal, the recorder displays a message that says "Signal Reception OK." If the signal reception is not working correctly, the recorder displays a failure message. In this case, see the Diagnostic Test section of the Problems and Solutions Tables on page A-18.

3 3 Dish Signal

TELEPHONE CONNECTION DIAGNOSTIC TEST

Select the Phone Connection option to begin the test. The recorder displays a message asking you to wait until the test is completed. If the telephone connection is correct, the recorder displays a message that says "Phone Connection OK." If the telephone is not connected properly, the recorder displays a failure message. In this case, see the Diagnostic Test section of the Problems and Solutions Tables on page A-18.

4 4 Phone Connection

MAIN UNIT DIAGNOSTIC TEST

This test verifies that the recorder is working correctly.

Select the Main Unit Test option to begin the test. The recorder displays a message asking you to wait until the test is completed. If the main unit is working correctly, the recorder displays a message that says "Main Unit OK." If the main unit is not working correctly, the recorder displays a failure message. In this case, call the JVC Service Center for assistance.

Note: This test may temporarily distort the TV picture.

5 5 Main Unit Test

Page 4-38