JVC HM-DSR100RU manual User and Installation Guide, Turning On The System, Changing Channels

User and

Installation Guide

TURNING ON THE SYSTEM

Remote

Buttons

1.Turn ON the TV and any other installed equipment.

Menu Options

2. Turn ON the recorder. The power light on the	POWER
recorder front panel illuminates.

Note: The remote must be in SAT mode to use it to turn ON the recorder.

CHANGING CHANNELS

If the program you select to view is security locked, you must enter the system password to view it.

Remote

Buttons

Either: Press the Up or Down arrow button to change channels.

All unpurchased channels are automatically skipped. You will see only the channels in the active Favorites List.

Menu Options

or

Enter the desired three-digit channel number using the number pad buttons.

Note: When changing channels to a channel number that has fewer than three digits (for example channel number 2 or 10), you must enter zeros to make these channel numbers three digits (for example 002 or 010).

1 2 3

4 5 6

7 8 9

0

Page 3-4