
6 | Starting Your |
Installation |
INTRODUCTION
FOR MORE INFORMATION:
If you do not want to install your system yourself, you can have it installed by a professional. Call the DISH Network Service Center at
If you do intend to install your system yourself, this chapter provides installation procedures. The procedures are relatively simple, but do require some skill in
An optional Installation Kit is available. This Kit includes typical hardware used during installation, an instructional videotape, and a more detailed Installation Kit Guide. See Optional Installation Kit on page
You should be somewhat familiar with construction related tasks, as the following installation instructions do not contain
It is very important that you carefully follow all local building and electrical codes (especially the latest revision of the National Electrical Code) and standard safety procedures for installing and working with this type of equip- ment. Improper procedures or installation can result in damage to the equip- ment or the building, and injury or death to you. If you are not sure about whether your installation follows these codes, contact a licensed building inspector or electrician in your area for assistance.
Take extreme care to avoid contacting any overhead power lines, lights, and power circuits while you are installing the satellite antenna. Contact with any of these could prove fatal. Do not install the satellite antenna near power lines.
See the Important Product Safety Instructions on page ii for more information.
Page