User and Installation Guide
7.Enter the new password using the number pad buttons. As soon as you enter the fourth digit of the password, the system highlights the OK option. Go on to the next step.
8.Either: Select the OK option.
or
1 | 2 | 3 | * | * | * | * |
|
|
| ||||
4 | 5 | 6 |
|
|
|
|
7 8 9
0
OK
If you do not want to change the password, select the Cancel option to cancel the password change. You can stop here.
|
| L |
|
| E |
|
| C |
| N | |
A |
| |
C |
|
|
Cancel
9.Enter the new password again for verification, using the number pad buttons. As soon as you enter the fourth digit of the password, the system highlights the OK option. Press the Select button.
Note: Write down the new password and keep it in a safe place.
1 | 2 | 3 | * | * | * | * |
|
|
| ||||
4 | 5 | 6 |
|
|
|
|
7 | 8 | 9 |
|
|
|
|
| 0 |
|
|
|
|
|
DISCARDING ALL SETUP INFORMATION
If you want to discard changes using the system menus and reset the recorder to be the same as when it was shipped from the factory, do the following:
When you reset the recorder to default settings, all event timers and settings that enable the recorder to control a VCR will be discarded.
If you have defined security locks on the recorder, and the recorder is locked, these locks will not be discarded. If the recorder is unlocked, these locks will be discarded. (You can confirm whether locks have been discarded by opening the Program Guide and seeing if the lock symbol is displayed.)
The system password is not discarded. You cannot reset the recorder to default settings to discard a password you have forgotten, nor can an unauthorized person do so to bypass a security lock.
Page
