JVC HM-DSR100U, HM-DSR100DU, HM-DSR100RU manual A-21

			Appendix	A
		Problems and Solutions Tables
ADD LOCAL OR CABLE CHANNELS TO THE PROGRAM GUIDE
	What Is	Possible Why	What to Do
	Happening
	A desired local or cable	You have not yet added the channel	You must add all desired local or cable channels to the Program
	channel does not appear	to the Program Guide.	Guide. Note that you cannot add both local and cable channels.
	in the Program Guide.
	A desired local	You may have added local	If you add one type of channels and then select another option,
	broadcast or cable	broadcast channels and then	the Selected Local Channels list will not change. In that case,
	channel appears in the	selected one of the Cable Channels	the channels on the list would not be correct for the option you
	Program Guide, but the	options, or added cable channels	selected. Whenever you change the option, you should edit the
	programming on the	and then selected the Broadcast	Selected Local Channels list.
	channel does not match	Channels option.	Contact your cable TV provider for information on the Standard
	published schedules.	You may have selected an	HRC, and IRC cable systems, and for help in choosing the
		inappropriate Cable Channels	appropriate Cable Channels option.
		option.
	A desired local	Your TV may not be operating	Make sure that your TV is working properly, and that the
	broadcast or cable	properly.	brightness, contrast, and tuning are adjusted correctly. Make sure
	channel appears in the	The connections in your system	that the TV is connected properly to your recorder.
	Program Guide, but the	may be faulty.	Verify that all required coaxial cables are in place. Check for
	reception of the channel	Your TV antenna may need to be	moisture or water leakage in all connections. Dry out if needed,
	is poor or absent.	re-aimed.	then seal with coaxial cable sealant after reconnection. Check
		Other nearby electrical equipment	antenna-to-recorder cable run length; if over 100 feet, install a
		(such as cellular telephones,	line amplifier.
		computers, microwave ovens,	Make sure that the TV antenna is aimed properly.
		radios, stereos, or TVs) may be	Note your local weather conditions. Heavy rain, snow, or cloud
		causing interference.	cover may be interfering with transmission of signals.
			Check other nearby electrical equipment as possible sources of
			interference.
	You try to enter a	You may be entering a channel	To enter a channel number with fewer than three digits, you must
	channel number, but the	number with fewer than three	enter leading zeros. For example, enter 002 for channel 2, and
	recorder does not	digits, for example 2 or 10.	010 for channel 10.
	respond.
	You try to enter a	You may have tried to enter more	Remember that you can enter only a limited number of
	channel name in the	than the maximum number of	characters, including spaces, for a channel name. You may need
	Edit Local Channel	characters.	to abbreviate the name.
	Name menu, but the
	recorder does not
	display the last
	character(s) of the
	name.
TAPE PLAYBACK AND RECORDING
	What Is	Possible Why	What to Do
	Happening
	The cassette gets stuck	The cassette may have been	Make sure the window side is up, the rear label side is facing you
	partway during loading,	inserted incorrectly.	and the arrow on the front of the cassette is pointing towards the
	and is ejected.		recorder. Then insert the cassette.
	The tape stops during	The Counter Memory function may	Check to see whether there is a checkmark next to Counter
	rewind or fast forward.	be turned on in the VCR Setup	Memory in the VCR Setup screen's Options list. If there is,
		screen.	remove the checkmark from the checkbox (see page. 5-14).

Page A-21