JVC HM-DSR100U, HM-DSR100DU, HM-DSR100RU manual Accidental erasure prevention

User and Installation Guide

4.Use the arrow buttons to select Bit Stream (D-VHS) Recording "ON" or "OFF" in

the Mode section of the VCR Setup screen. Refer to the next page for further instructions.

♦Bit Stream (D-VHS) Recording is possible only when you record a satellite channel using a D-VHS cassette, and when Bit Stream (D-VHS) Recording setting is set to "ON".

5. Use the arrow buttons to select the Recording Speed ("SP" or "EP") for analog recordings in the Mode section of the VCR Setup screen. Refer to the next page for further instructions.

♦When EP is selected, the EP indicator on the recorder's front panel lights.

♦The recording speed for bit stream (D-VHS) recordings remains unchanged regardless of this setting.

6. Press the Rec(ord) button.
♦ The REC indicator on the front panel lights	REC
during recording.

7. If you wish to pause recording at any time, press the Pause button. Pressing the Play button will resume recording.

♦ The REC and PAUSE indicators on the front panel both remain lit while recording is paused.

♦While recording is paused, neither the channel nor the recording speed can be changed. Press the Stop button first, and then change the channel/recording speed as necessary.

8. Press the Stop button to stop the tape, and then press the Eject button on the recorder's front panel to eject the tape.

SP

EP

Accidental erasure prevention

♦To prevent accidental recording on a recorded cassette, remove its record safety tab. To record on it later, cover the hole with adhesive tape.

Page 5-4