JVC HM-DSR100U, HM-DSR100DU, HM-DSR100RU manual User and Installation Guide, Timers

User and Installation Guide

8.Select the Create Timer option to save the event timer, and press the Select button.

9.Press the Power button to turn the recorder off. The TIMER light on the recorder's front panel will illuminate.

Create Timer

SELECT

POWER

REVIEWING EVENT TIMERS

You can display a list of scheduled event timers at any time, using the Event Timer Management menu. Or, use this menu to delete event timers. To open the Event Timer Management menu, do the following:

		Remote		Menu Options
		Buttons
1.	Press the Mode button until the remote is in	MODE
	SAT mode.
2.	Press the Menu button to open the	MENU
	Main Menu.
3.	Select the Timers option.	7
			7	Timers

RESTRICTED PROGRAMS AND EVENT TIMERS

You must enter the system password before you can create a timer for a locked program, and order a pay per view program before you can create a timer for it. If you do not, or if the program is blacked out in your area, when the timer executes the recorder may display an error message instead of the program.

POWER OFF AND EVENT TIMERS

If your recorder is OFF at the time an Auto-Tuneor VCR Event Timer is scheduled to execute, the timer turns the recorder ON. Once the event has ended, your recorder powers OFF (unless you pressed any remote or recorder buttons during the time that the timer was active).

If your recorder is OFF at the time a Reminder Event Timer is scheduled to execute, the timer turns the recorder ON and tunes it to the channel you last viewed. The recorder then briefly displays the reminder screen.

Page 5-32