Starting Your Installation | 6 |
Optional Installation Kit |
♦Sledgehammer or small fence post driver
♦Drill and 1/2 inch drill bit - long enough to drill through the exterior wall of your building
♦Compass *
♦Silicone sealant (for sealing drill holes) *
Note: You will need additional tools and materials, depending on the type of surface on which you mount the antenna. Each of the procedures for mounting the antenna lists these. If you find that you do not have the tools and skills for a certain procedure, call a profes- sional, such as a satellite television dealer or an electrician, for assistance.
OPTIONAL INSTALLATION KIT
The Installation Kit (VU73457) is an optional product that contains the hardware and materials that you would typically use to install the system. To buy the Installation Kit, contact the location where your system was purchased or call the Service Center.
If you did not purchase the Installation Kit, but still plan to install your system yourself, you should gather the appropriate materials (such as those listed below) before beginning instal- lation. The Installation Kit contains the following:
♦Installation Kit Guide
♦Installation video tape with
♦25' telephone cord with
♦Dual telephone adapter
♦Telephone coupler, for connecting two telephone cords
♦8' Triple phono (RCA) audio/video cord
♦Dual grounding block
♦30' Grounding wire, either 8 gauge aluminum or 10 gauge copper
♦25'
♦75'
♦4 Toggle anchors (3" x 1/4"); 4 Double expansion anchors
♦4 Machine bolts (3" x 1/4")
♦4 Lag screws (3" x 5/16"); 4 Lag screws (2" x 5/16")
♦4 Cable ties; 10 Cable clips for the coaxial cable
Page
