JVC HM-DSR100U, HM-DSR100DU, HM-DSR100RU manual User and Installation Guide

User and

Installation Guide

ADDING LOCAL OR CABLE CHANNELS

To add local broadcast or cable channels, do the following:

1.Press the Mode button until the remote is in SAT mode.

2.Press the Menu button to open the

Main Menu.

3.Select the System Setup option.

4.Select the Installation option.

5.Select the Add Local Channel option. If you are setting up your local channels for the first time or switching options in the

Select Cable/Broadcast list, follow the steps in order. Otherwise, go to step 8 to add channels to the Selected Local Channels list.

6.Press the Left arrow button to move the highlight into the Select Cable/ Broadcast list.

7.Press the Up or Down arrow button to highlight either the Broadcast Channels option or the appropriate Cable Channels option (Standard, HRC, or IRC)(Contact your cable TV provider for information on whether you have a standard, HRC or IRC cable system. Press the Select button to choose the channel option.

Remote

Buttons	Menu Options
MODE
MENU

6	6	System Setup
1	1	Installation
2	2	Add Local Chan.

T

H

E

M

E

Broadcast Channels

Standard Cable Channels

HRC Cable Channels

IRC Cable Channels

SELECT

Note: You can add either cable (Standard, HRC, or IRC) or broadcast channels,

not both. If you add one type of channel and then select another option, the Selected Local Channels list will not change. In that case, the channels in the list would not be correct for the option you selected. So, whenever you change the option, you should also edit the Selected Local Channels list.

Page 3-14