JVC HM-DSR100U, HM-DSR100DU, HM-DSR100RU manual Connecting the Recorder to a Telephone Line

Installing and Wiring Your System	7
Connecting the Recorder to a Telephone Line

CONNECTING THE RECORDER TO A TELEPHONE LINE

You must connect your recorder to an active telephone line if you want to purchase pay per view programs using the recorder. Attach a telephone line with a standard RJ-11 connector to the Telephone Jack on the recorder back panel, and then connect the line to an active telephone connection.

When you purchase pay per view programs, the recorder stores the information in its memory. The recorder dials into the Service Center to send the purchase information. These calls are made in the middle of the night, at irregular times, and are toll-free (no cost to you).

The recorder must be connected to an active telephone line at all times to order pay per view programs using the recorder.

If you use a wireless telephone jack, be aware that some such jacks do not support all the features of this recorder.

You must also set up the recorder for the type of telephone system you have (touchtone or rotary/pulse), and specify a telephone number prefix, if such a prefix is required to place an outside call.

Note: A prefix is usually required only for business installations. For most residential installations, the default setting of No prefix needed will enable correct operation. In this case, you need only specify the telephone type.

Do the following:

		Remote			Menu Options
		Buttons
1.	Press the Mode button until the remote is in	MODE
	SAT mode.
2.	Press the Menu button to open the	MENU
	Main Menu.
3.	Select the System Setup option.	6
			6		System Setup
4.	Select the Installation option.	1
				1	Installation
5.	Select the Telephone System option.	4
				4 Telephone System
6.	Press the Up arrow button to move the				Phone Type

highlight to the Phone Type list.

TouchTone

Rotary / Pulse

Page 7-15