JVC HM-DSR100U, HM-DSR100DU, HM-DSR100RU manual VCR Features, Playback Features, Video stabilizer

VCR Features	5
Playback Features

VIDEO STABILIZER

Only with: Playback of analog recorded tapes.

You can correct vertical vibration when playing back unstable EP recordings that were made on another VCR. To turn this function on for automatic correction of vertical vibration, do the following:

		Remote		Menu Options
		Buttons
1.	Press the Mode button until the remote is in	MODE
	the SAT mode.
2.	Press the Menu button to open the	MENU
	Main Menu.
3.	Select the VCR Setup option.	8
			8	VCR Setup

4.Press the arrow buttons to move the highlight to Video stabilizer in the

Options list.

5.Press the Select button to place a checkmark in the checkbox next to

Video stabilizer. Pressing the Select button again will remove the checkmark.

Video stabilizer

SELECT

6. Press the arrow buttons to move the highlight to Save.

7. Press the Select button to save all

Save

changes.SELECT

Notes:

♦Video Stabilizer does not operate during recording, during special effects playback, during playback of a recording made at SP speed, and during playback of a bit stream recorded D-VHS tape.

♦When you finish viewing the tape, be sure to turn this function back off.

♦Turning the VCR's power on or inserting a cassette into the recorder will automatically turn this function off.

Page 5-11