JVC HM-DSR100U, HM-DSR100DU, HM-DSR100RU manual To choose through the Program Guide

User and

Installation Guide

CREATE AN EVENT TIMER

You can set the recorder's timer to automatically record a program by choosing the program through the Browse Banner, Program Guide screen, or Theme Categories screen.

Load a cassette into the cassette loading slot.

♦Make sure the record safety tab is intact.

♦If the tab is missing, cover the hole with adhesive tape before inserting the cassette.

To choose through the Browse Banner...

1.Select the desired program using one of the procedures in Changing Channels via The Browse Banner on page 4-5. Go to step 2.

To choose through the Program Guide...

1.Select the desired program using one of the procedures in Changing Channels via The Program Guide on page 4-9. Go to step 2.

To choose through the Theme Categories screen...

1.Select the desired program using one of the procedures in Selecting a Program in the Themes List on page 4-12. Go to step 2.

Note: This program cannot be running currently

— it must begin sometime in the future.

2.Press the Select button to display the

Create an Event Timer menu.

3.Press the Left arrow button to move the highlight to the VCR option.

Remote Buttons

SELECT

T

H

E

M

E

Menu Options

4.Press the Up or Down arrow button to highlight the desired type of event timer (VCR, Auto-Tune, or Reminder).

Then press the Select button.

Timer Type

VCR

Auto-Tune

Reminder

SELECT

Page 5-24