JVC HM-DSR100RU manual User and Installation Guide, lag screws, 1/4” x 3” 4 lag screws, 5/16” x 2”

User and

Installation Guide

MOUNTING THE ANTENNA ON SIDING

Materials Required

♦2 lag screws, 1/4” x 3”

♦4 lag screws, 5/16” x 2”

Tools Required

♦drill

♦1/8” twist drill bit

♦3/16” twist drill bit

♦7/16” socket or box-end wrench

♦bubble level or plumb line

♦pencil

We do not recommend mounting the satellite antenna on aluminum or vinyl siding. These materials can be structurally unsound, causing eventual shifting of the dish. To mount the satellite antenna on solid siding, make sure to follow the suggestions below.

♦The surface must be flat and even. You may need to use a separator, or shim, between the shingles to even the siding surface.

♦Mount the foot on the foundation material beneath the siding surface. This may be a building stud, cinder block, or other solid material. To locate the studs, find the vertical line of nails where the siding is attached to the building, or use a stud finder.

Page 6-16