JVC HM-DSR100U, HM-DSR100DU, HM-DSR100RU manual Starting Your Installation

Starting Your Installation	6
Discussion of Potential Mounting Sites

MOUNTING THE ANTENNA ON CINDER BLOCK

Materials Required

♦4 toggle anchors, 1/4”

♦4 machine bolts, 1/4” x 3”

Tools Required

♦drill

♦1/2” masonry drill bit

♦7/16” socket or box-end wrench

♦bubble level or plumb line

♦pencil

You can mount the satellite antenna on cinder blocks, whether they are part of a wall or the side of a building.

♦The surface must be flat and even.

♦If you are mounting the satellite antenna on a building, make sure that the surface is true cinder block, not just a block facing over another material. If you are mounting the satellite antenna on block facing, see Mounting the Antenna on Siding on page 6-16.

♦Make sure that the cinder block and mortar is in good to excellent condition.

♦Use toggle anchors and machine bolts, inserted into the hollow of the block, as fasten- ers. Other types of anchors may not have the required strength.

Page 6-17