User and

Installation Guide

COMPONENTS OF THE SATELLITE ANTENNA

Note: The following pictures are not to scale.

The fully assembled satellite antenna looks like this. Following are descriptions of each piece of the satellite antenna.

LNBF (LOW NOISE BLOCK DOWNCONVERTER WITH INTEGRATED FEEDHORN)

The "dish" focuses the signals transmitted from the satellites onto the LNBF. The LNBF amplifies the signals, converts the whole "block," or range of signals to a lower frequency, and "feeds" the signals into the coaxial cable(s) connected to your recorder(s).

LNBF - SINGLE OUTPUT

If you purchased the single-output LNBF to use with the recorder, your package contains this LNBF. Note that this LNBF has only one coaxial cable connection.

LNBF - DUAL OUTPUT

The dual output LNBF supplied with the HM-DSR100DU and be used with more than one receiver. Note that this LNBF has two coaxial cable connections.

LNBF SUPPORT ARM

The LNBF support arm attaches the LNBF and the dish to the mast assembly.

Page 6-4

Page 130
Image 130
JVC HM-DSR100U, HM-DSR100DU, HM-DSR100RU manual Lnbf Dual Output, Components of the Satellite Antenna