JVC HM-DSR100U, HM-DSR100DU, HM-DSR100RU manual Tv/Vcr Button, The Parts of Your System

The Parts of Your System	2
The Remote Control

REMOTE BUTTONS

TV/VCR BUTTON

Depending on how you wire your system together, the TV/VCR button does the following:

♦In SAT (Satellite) mode, the TV/VCR button switches the TV connected to the RF or VHF output between satellite TV and broadcast or cable TV. However, the Local TV Link feature is an easier way to view both satellite programming and local broadcast programming (see Local TV Link on page 3-13 for information).

♦In D-VHS mode, the TV/VCR button acts the same as when in the SAT mode.

♦In TV mode, the TV/VCR button switches among the inputs available on your TV.

♦The TV/VCR button can be used when controlling a receiver or second VCR.

Note: The remote does not support this function for all TV's and VCR's.

POWER BUTTON

Press the Power button to turn the recorder ON or OFF. The power light on the recorder illuminates to indicate the recorder is ON.

MODE BUTTON

You can use the Mode button to set the remote to control the recorder, its built-in satellite tuner and other various electronic components, such as TVs, VCRs, Stereo Amplifiers and Cable Boxes.

If you press the Mode button once, a mode light flashes rapidly to indicate which mode the remote is using. Press the Mode button again to change the mode to the next mode setting. See Programming the Remote Control on page 4-39 for the procedure to program the remote to control your TV, the built-inVCR, and other equipment.

TV/VCR

POWER

MODE

The modes are as follows:

♦ In SAT (Satellite) mode the remote controls the built-in

satellite receiver. Some VCR functions are also

controllable.

SAT TV D-VHS AUX

♦ In TV mode the remote controls the TV.

♦ In D-VHS mode the remote controls the

built-inVCR. The buttons that can be used in the

D-VHS mode are labeled in green on the remote

control. Some tuner functions are also controllable.

♦ In AUX (Auxiliary) mode the remote controls another

electronic device. This can be a stereo amplifier,

second TV or a second VCR.

TV/VCR

POWER

Page 2-9