Starting Your Installation | 6 |
Components of the Satellite Antenna |
DISH
The dish reflects and focuses the signals from the satellites onto the LNBF.
Flathead bolts with nuts attach the dish to the support arm bracket.
LNBF SCREW AND WASHER
The LNBF screw and washer attach the LNBF to the end of the support arm.
CABLE CLIP (OPTIONAL)
The cable clip holds the coaxial cable(s) to the top of the support arm bracket.
MOUNTING BRACKET AND MAST ASSEMBLY
The mast assembly attaches the support arm (which holds the dish and the LNBF) to the mounting surface.
Note: If you are planning to use a pole to mount the satellite antenna, you will not need the mast assembly. In this case, the pole (instead of the mast) fits into the support arm bracket. However, you should keep the mast assembly in case you decide to relocate the satellite antenna.
Page
