JVC HM-DSR100U, HM-DSR100DU, HM-DSR100RU manual Editing to or from Another VCR, VCR Features

VCR Features	5
Editing to or from Another VCR

EDITING TO OR FROM ANOTHER VCR

You can use the recorder as the playback unit or the recording unit to edit from VHS to VHS. It is also possible to use the recorder as the playback unit to edit from D-VHS to VHS. It is not possible to edit from D-VHS to D-VHS by connecting to an external D-VHS recorder. To make an edited VHS tape, do the following:

Remote Buttons

Menu Options

1.Connect the playback unit's VIDEO OUT and AUDIO OUT connectors to the recording unit's VIDEO IN and AUDIO IN

connectors using the supplied Audio/Video cable.

♦If using another VCR with an S-VIDEO input connector, it is recommended to use the S-VIDEO connection to minimize picture degradation while editing.

♦When using the recorder as the recording unit and a monaural VCR as the playback unit, connect the VCR's AUDIO OUT connector to the AUDIO IN L connector on the recorder.

2.Load the cassette to be played into the playback unit, and load the cassette to be recorded into the recording unit.

3.Set the recording unit's input mode to

AUX.

♦With this recorder, press the number button "000". "AUX" will appear in the on-screen display instead of a channel number.

♦Select the SP or EP tape speed (see page 5-5).

4.Start tape playback on the playback unit. ♦ If you do not want superimposed

on-screen characters and symbols from the playback unit to be recorded onto the edited tape, turn its superimpose function off (if allowed by the playback unit).

1 2 3

4 5 6

7 8 9

0

5. Start recording on the recording unit.

Page 5-33