CHAPT ER
6-1
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-30644-01
6
Configuring Radio Settings
This chapter describes how to configure radio settings for the wireless device. This chapter includes the
following sections:
•Enabling the Radio Interface, page6-2
•Configuring the Role in Radio Network, page6-3
•Point-to-point and Multi Point bridging support for 802.11n platforms, page6-6
•Configuring Radio Data Rates, page6-9
•Configuring MCS Rates, page6-12
•Configuring Radio Transmit Power, page6-13
•Configuring Radio Channel Settings, page6-15
•Enabling and Disabling World Mode, page6-22
•Disabling and Enabling Short Radio Preambles, page6-22
•Configuring Transmit and Receive Antennas, page6-23
•Enabling and Disabling Gratuitous Probe Response, page6-25
•Disabling and Enabling Aironet Extensions, page6-25
•Configuring the Ethernet Encapsulation Transformation Method, page6-26
•Enabling and Disabling Reliable Multicast to Workgroup Bridges, page6-27
•Enabling and Disabling Public Secure Packet Forwarding, page6-29
•Configuring the Beacon Period and the DTIM, page6-31
•Configure RTS Threshold and Retries, page6-31
•Configuring the Maximum Data Packet Retries, page6-32
•Configuring the Fragmentation Threshold, page6-33
•Enabling Short Slot Time for 802.11g Radios, page6-33
•Performing a Carrier Busy Test, page6-34
•Configuring VoIP Packet Handling, page6-34
•Configuring ClientLink, page 6-37
•Debugging Radio Functions, page6-38