Contents
3
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-29225-01
Connecting to the 1550 Series Access Point Locally 4-5
Default Radio Settings 4-6
Assigning Basic Settings 4-6
Default Settings on the Easy Setup Page 4-10
Understanding the Security Settings 4-11
Using VLANs 4-12
Security Types for an SSID 4-12
Limitations of Security Settings 4-14
CLI Configuration Examples 4-15
Configuring System Power Settings Access Points 4-21
Using the AC Power Adapter 4-21
Using a Switch Capable of IEEE 802.3af Power Negotiation 4-21
Using a Switch That Does Not Support IEEE 802.3af Power Negotiation 4-22
Using a Power Injector 4-22
dot11 extension power native Command 4-22
Support for 802.11n Performance on 1250 Series Access Points with Standard 802.3af PoE 4-22
1250 Series Power Modes 4-22
Support for 802.11ac 4-23
Channel Widths for 802.11ac 4-23
Power Management for 802.11ac 4-24
Assigning an IP Address Using the CLI 4-25
Using a Telnet Session to Access the CLI 4-25
Configuring the 802.1X Supplicant 4-26
Creating a Credentials Profile 4-26
Applying the Credentials to an Interface or SSID 4-27
Applying the Credentials Profile to the Wired Port 4-27
Applying the Credentials Profile to an SSID Used For the Uplink 4-27
Creating and Applying EAP Method Profiles 4-28
Configuring IPv6 4-28
Configuring DHCPv6 address 4-30
IPv6 Neighbor Discovery 4-30
Configuring IPv6 Access Lists 4-32
RADIUS Configuration 4-32
IPv6 WDS Support 4-32
CDPv6 Support: 4-33
RA filtering 4-34
Automatic Configuring of the Access Point 4-34
Enabling Autoconfig 4-34