Removing the Cover from a Cisco 3825 Router

Preventing Electrostatic Discharge Damage

Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD can occur when printed circuit cards are improperly handled and can result in complete or intermittent failures. Always follow ESD prevention procedures when removing and replacing cards. Ensure that the router is electrically connected to earth ground. Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. Connect the clip to an unpainted surface of the router frame to safely channel unwanted ESD voltages to ground. To guard against ESD damage and shocks, the wrist strap and cord must be used properly. If no wrist strap is available, ground yourself by touching the metal part of the router.

Caution For safety, periodically check the resistance value of the ESD-preventive wrist strap, which should be between 1 and 10 megohms (Mohm).

Removing the Cover from a Cisco 3825 Router

You must remove the cover from a Cisco 3825 router to access the power supply and motherboard. The router must be removed from the rack for this procedure. You will need number 1 and number 2 Phillips screwdrivers.

If your router uses AC or DC power, observe the following warning:

Warning Do not touch the power supply when the power cord is connected. For systems with a power switch, line voltages are present within the power supply even when the power switch is off and the power cord is connected. For systems without a power switch, line voltages are present within the power supply when the power cord is connected. Statement 4

If your router uses DC power, observe the following warning:

Warning Before performing any of the following procedures, ensure that power is removed from the DC circuit. Statement 1003

Caution Before removing the cover, make sure that the CompactFlash memory card ejector button is flush with the front panel. If the button projects from the panel, removing the cover can damage it.

Caution To prevent damage to the router, do not attempt to pry off the plastic bezel.

Step 1 Power down the router and disconnect the power cord from the front of the router.

Warning Before opening the unit, disconnect the telephone-network cables to avoid contact with telephone-network voltages. Statement 1041

Step 2 Disconnect all network interface cables from the rear panel of the router.

Installing and Upgrading Internal Components in Cisco 3800 Series Routers

80

OL-5975-04

 

 

Page 109 Page 111
Page 110
Image 110
Cisco Systems OL-5965-01 warranty Removing the Cover from a Cisco 3825 Router, Preventing Electrostatic Discharge Damage
Page 109 Page 111

OL-5965-01 specifications

Cisco Systems OL-5965-01 is a powerful learning tool designed to provide a comprehensive understanding of Cisco networking technologies. This courseware is part of Cisco’s extensive portfolio aimed at both aspiring and seasoned networking professionals. By using OL-5965-01, learners can access valuable resources that help them master various Cisco technologies and prepare for associated certification exams.

A key feature of OL-5965-01 is its focus on real-world applications. The content emphasizes practical knowledge that can be immediately applied in a business environment. This is particularly important for IT professionals who need to align their skills with the demands of the industry. The courseware covers essential Cisco technologies such as routing, switching, and security. By learning about these foundational elements, participants can build a solid understanding of network structures.

Another defining characteristic of OL-5965-01 is its interactive learning modules. The platform utilizes simulation-based training, allowing users to engage directly with networking equipment in a virtual environment. This hands-on approach fosters deeper learning, as participants can experiment with configurations and troubleshoot issues without the risk of impacting live networks. This experiential training method is crucial for mastering complex networking concepts.

Furthermore, OL-5965-01 supports various learning styles. With its blend of video lectures, practical labs, and assessments, learners can choose the approach that best suits their needs. The courseware also includes detailed explanations and step-by-step guides, making it easier for individuals to grasp intricate topics.

The technology behind OL-5965-01 is designed to be user-friendly and accessible. The platform is built to cater to both novices and experienced technicians, ensuring that users of all skill levels can benefit. Regular updates help ensure that the content remains relevant in a rapidly evolving technological landscape.

In summary, Cisco Systems OL-5965-01 is an essential resource for those looking to enhance their networking expertise. By offering practical experience, interactive learning, and comprehensive coverage of Cisco technologies, this courseware aligns well with the needs of IT professionals. It stands as a vital tool for anyone looking to advance their knowledge and career in networking.
Top Page Image Contents