Cisco Systems OL-5965-01 warranty Slot divider Slot adapters

Modifying the Width of Network Module Slots

To cover an empty network module slot:

•Extended single-wide slot—Install a slot adapter as described in the “Installing and Removing Slot Adapters” section on page 59. Then attach a blank faceplate and tighten the two screws.

•Extended double-wide slot—Install a slot divider as described in the “Installing and Removing Slot Dividers” section on page 55 . Install a slot adapter in each single-wide slot as described in the “Installing and Removing Slot Adapters” section on page 59. Then attach a blank faceplate in each slot and tighten the two screws.

Figure 31 Slot Divider and Adapters for Standard Single-Wide Network Modules (Generic Router)

121386

2

1

2

1

Slot divider

2

Slot adapters

Installing Network Modules in Cisco 3800 Series Routers

54 OL-5973-01