Cisco Systems OL-5965-01 Removing the Existing Power Supply, Installing an AC Power Supply

Installing a Power Supply in a Cisco 3825 Router

Removing the Existing Power Supply

To remove the existing power supply from a Cisco 3825 router, follow these steps:

Step 1 Remove the router cover, following the procedure in the “Removing the Cover from a Cisco 3825 Router” section on page 80.

Step 2 Remove the power supply and tray assembly, following the procedure in the “Removing the Power Supply Assembly from a Cisco 3825 Router” section on page 81.

Step 3 Turn the power supply assembly over so that the tray is on top.

Step 4 Using a number 1 Phillips screwdriver, remove the two screws that hold the power supply to the tray. Separate the pwer supply from the tray. See Figure 67.

Figure 67 Cisco 3825 Power Supply Removed from the Tray

121398

Installing an AC Power Supply

The AC power supply has a single power connector, as shown in Figure 68.

Figure 68 AC Power Supply

1

127780

1

Primary power connector

Installing and Upgrading Internal Components in Cisco 3800 Series Routers

OL-5975-04 99