Appendix B Case Study: Troubleshooting Cisco Unified IP Phone Calls

Troubleshooting Intracluster Cisco Unified IP Phone Calls

At this point, the called party’s Cisco Unified IP Phone goes off hook; therefore,

Cisco Unified CallManager stops generating the ringer tone to calling party.

16:05:45.140 CCMStationD - stationOutputStopTone tcpHandle=0x4fbbc30

In the following messages, Cisco Unified CallManager causes the Skinny Station to begin receiving a Unicast RTP stream. To do so, Cisco Unified CallManager provides the IP address of the called party as well as codec information and packet size in msec (milliseconds). PacketSize designates an integer that contains the sampling time, in milliseconds, that is used to create the RTP packets.

Note Normally this value gets set to 30 msec. In this case, it is set to 20 msec.

16:05:45.140 CCMStationD - stationOutputOpenReceiveChannel tcpHandle=0x4fbbc30 myIP: e74610ac (172.16.70.231)

16:05:45.140 CCMStationD - ConferenceID: 0 msecPacketSize: 20 compressionType:(4)Media_Payload_G711Ulaw64k

Similarly, Cisco Unified CallManager provides information to the called party (1000).

16:05:45.140 CCMStationD - stationOutputOpenReceiveChannel tcpHandle=0x4fbb150 myIP: e64610ac (172.16.70.230)

16:05:45.140 CCMStationD - ConferenceID: 0 msecPacketSize: 20 compressionType:(4)Media_Payload_G711Ulaw64k

Cisco Unified CallManager has received the acknowledgment message from called party for establishing the open channel for RTP stream, as well as the IP address of the called party. This message informs the Cisco Unified CallManager of two pieces of information about the Skinny Station. First, it contains the status of the open action. Second, it contains the receive port address and number for transmission to the remote end. The IP address of the transmitter (calling part) of the RTP stream is ipAddr, and PortNumber is the IP port number of the RTP stream transmitter (calling party).

16:05:45.265 CCMStationInit - InboundStim - StationOpenReceiveChannelAckID tcpHandle=0x4fbb150, Status=0, IpAddr=0xe64610ac, Port=17054, PartyID=2

Cisco Unified CallManager uses the following messages to order the station to begin transmitting the audio and video streams to the indicated remote Cisco Unified IP Phone IP address and port number.

16:05:45.265 CCMStationD - stationOutputStartMediaTransmission tcpHandle=0x4fbbc30 myIP: e74610ac (172.16.70.231)

16:05:45.265 CCMStationD - RemoteIpAddr: e64610ac (172.16.70.230) RemoteRtpPortNumber:

17054 msecPacketSize: 20 compressionType:(4)Media_Payload_G711Ulaw64k

16:03:25.328 CCMStationD(1): TCPPid=[1.100.117.1] OpenMultiReceiveChannel conferenceID=16777217 passThruPartyID=1000011 compressionType=101(Media_Payload_H263) qualifierIn=?. myIP: e98e6b80 (128.107.142.233)<CT::1,100,11,1.1><IP::><DEV::>

16:03:25.375 CCMStationInit: TCPPid=[1.100.117.1] StationOpenMultiMediaReceiveChannelAck

Status=0, IpAddr=0xe98e6b80, Port=65346,

PartyID=16777233<CT::1,100,105,1.215><IP::128.107.142.233>

16:03:25.375 CCMStationD(2): TCPPid = [1.100.117.2]

star_StationOutputStartMultiMediaTransmission conferenceID=16777218

passThruPartyID=16777250 remoteIpAddress=e98e6b80(66.255.0.0) remotePortNumber=65346 compressType=101(Media_Payload_H263) qualifierOut=?. myIP: e98e6b80 (128.107.142.233)<CT::1,100,105,1.215><IP::128.107.142.233>

In the following traces, the previously explained messages are sent to the called party. The messages that indicate that the RTP media stream has been started between the called and calling party, follow these messages.

Troubleshooting Guide for Cisco Unified CallManager Release 5.0(2)

 

B-8

OL-9420-01

 

 

 

Page 8
Image 8
Cisco Systems OL-9420-01 appendix CCMStationD stationOutputStopTone tcpHandle=0x4fbbc30