A-46
Cisco ONS 15454 Reference Manual, R8.0
April 2008
AppendixA Hardware Specifications
A.6.19 OC192SR1/STM64IO Short Reach Card Specifications
–
Minimum transmitter output power: Depends on SFP (see A.2 SFP, XFP, and GBIC
Specifications, pageA-4)
–
Center wavelength: See wavelength plan
–
Center wavelength accuracy: 1 nm to 4 nm, depending on SFP
–
Transmitter: FP and DFB laser
•Receiver
–
Maximum receiver level: Depends on SFP (see A.2 SFP, XFP, and GBIC Specifications,
page A-4)
–
Minimum receiver level: Depends on SFP (see A.2 SFP, XFP, and GBIC Specifications,
page A-4)
–
Receiver: PIN PD
–
Receiver input wavelength range: Depends on SFP
•Environmental
–
Operating temperature: –40 to +149 degrees Fahrenheit (–40 to +65 degrees Celsius)
–
Operating humidity: 5 to 95 percent, noncondensing
–
Power consumption: 38.00 W, 0.79 A at –48 V, 129.66 BTU/hr
•Dimensions
–
Height: 12.650 in. (321.3 mm)
–
Width: 0.716 in. (18.2 mm)
–
Depth: 9.000 in. (228.6 mm)
–
Depth with backplane connector: 9.250 in. (235 mm)
–
Weight not including clam shell: 3.1 lb (1.3 kg)
•Wavelength plan. Currently available wavelengths and versions of the MRC-2.5G-4 card:
–
For ONS-SC-2G-30.3 through ONS-SC-2G-60.0 SFPs: 1530.33 nm to 1560.61 nm
(32 distinct wavelengths at 100 GHz spacing)
–
For ONS-SE-622-1470 through ONS-SE-622-1610 SFPs: 1470 to 1610 nm
(eight distinct wavelengths at 2500 GHz spacing)
–
For ONS_SE-155-1470 through ONS-SE-155-1610 SFPs: 1470 to 1610 nm
(eight distinct wavelengths at 2500 GHz spacing)
A.6.19 OC192SR1/STM64IO Short Reach Card Specifications
Note The OC192SR1/STM64IO Short Reach card is designated as OC192-XFP in CTC.
The OC192SR1/STM64IO Short Reach card has the following specifications:
•Line
–
Bit rate: OC-192 (9.9520 Gbps)
–
Fiber: 1310-nm single-mode
–
Connectors: LC duplex connector for the XFP