CHAPT ER

22-1
Cisco ONS 15454 Procedure Guide, R7.0
November 2007
22
DLPs A500 to A599
Note The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms
do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration.
Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's
path protection feature, which may be used in any topological network configuration. Cisco does not
recommend using its path protection feature in any particular topological network configuration.

DLP-A507 View OC-N PM Parameters

Step1 In node view, double-click the OC-N card where you want to view PM counts. The card view appears.
Step2 Click the Performance tab (Figure22-1).
Purpose This task enables you to view performance monitoring (PM) counts on
an OC-N card and port to detect possible performance problems.
Tools/Equipment None
Prerequisite Procedures DLP-A60 Log into CTC, page 17-69
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Retrieve or higher