22-2
Cisco ONS 15454 Procedure Guide, R7.0
November 2007
Chapter22 DLPs A500 to A599
DLP- A507 View OC-N PM Parameters
Figure22-1 Viewing OC-N Card Performance Monitoring Information
Step3 In the Port drop-down list, click the port you want to monitor.
Step4 Click Refresh.
Step5 View the PM parameter names that appear in the Param column. The PM parameter values appear in the
Curr (current), and Prev-n (previous) columns. For PM parameter definitions, refer to the “Performance
Monitoring” chapter in the CiscoONS 15454 Reference Manual.
Step6 To monitor another port on a multiport card, choose another port from the Port drop-down list and click
Refresh.
Step7 Return to your originating procedure (NTP).
96974
Directions
radio buttons
Performance
tab
Card View
Intervals
radio buttons
Help
button
Clear
button
Baseline
button
Auto-refresh
drop-down list
Sub-signal
STS drop-
down list
Signal-type
port drop-
down list
Refresh
button