22-26
Cisco ONS 15454 Procedure Guide, R7.0
November 2007
Chapter22 DLPs A500 to A599
DLP- A527 Change the OC-N Card ALS Maintenance Settings
Note The threshold value appears after the circuit is created.
Step7 Return to your originating procedure (NTP).
DLP-A527 Change the OC-N Card ALS Maintenance Settings
Note For the default values and domains of user-provisionable card settings, refer to the “Network Element
Defaults” appendix in the Cisco ONS 15454 Reference Manual.
Step1 In node view, double-click the OC-N card where you want to change the ALS maintenance settings.
Step2 Click the Maintenance > ALS tabs.
Step3 Modify any of the settings described in Table22-5 by clicking in the field you want to modify. In some
fields you can choose an option from a drop-down list; in others you can type a value or select or deselect
a check box. The provisionable parameters are listed in the options column in the table.
Step4 Click Apply. If the change affects traffic, a warning message displays. Click Yes to complete the change.
ES Errored seconds
FC Failure count
SES Severely errored seconds
UAS Unavailable seconds
15 Min radio button Clicking this radio button and then clicking Refresh will cause the
threshold values on this tab to display for 15-minute intervals.
1 Day radio button Clicking this radio button and then clicking Refresh will cause the
threshold values on this tab to display for 1-day intervals.
Table22-4 SONET Threshold Options for DS3i-N-12 Cards (continued)
Parameter Description
Purpose This task changes the automatic laser shutdown (ALS) maintenance
settings for the OC-N cards. This feature is available for OC3-8, OC-192,
and MRC-12 cards.
Tools/Equipment None
Prerequisite Procedures DLP-A60 Log into CTC, page 17-69
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher