Cisco Systems SFS 3012 InfiniBand Switch Cards

42

InfiniBand Switch Cards

Each InfiniBand switch card is held in place by two screws, one on the left side and one on the right side

of the card.

Installing an InfiniBand Switch Card

NOTE: Slot 16 must always have an Infiniband switch card inserted in order to maintain connectivity.

To install the InfiniBand switch card in the Topspin 360 chassis:

1. Remove the blanking panel from the switch card bay, if it is still in place.

2. Insert the switch card into an open slot.

During insertion, make sure the ejectors are perpendicular to the front panel.

3. Insert card until it is fully seated, and close the ejector levers.

4. Tighten the two captive panel screws on the front panel to secure the card to the chassis.

Figure 4-1: Removing an InfiniBand switch card (Topspin 360)

Configuring a New InfiniBand Switch Card

When an InfiniBand switch card is added to the chassis, the system does not dynamically discover the

attributes of the new card. Perform the following steps after the initial installation:

1. Enter the show card command. You can follow the command with

• An individual slot number (card#).

• A range of slot numbers (in the form card#-card#).

• A list of slot numbers in the form card#,card#,…(there are no spaces between elements in the

list)

Contents

Main Page Page 5: Install and Boot the Topspin 360.............. 19 6: Topspin 360 Field Replaceable Units ...... 41 7: Topspin 360 LEDs.................................... 49 8: Specifications and Compliance................ 57 Page vii Regulatory Notices FCC Statement Safety Information Electrical Cautions viii ix General Cautions Laser Cautions x Contact Information Laser Specs xi Product Registration THANK YOU FOR PURCHASING YOUR TOPSPIN PRODUCT! Registration Benefits Registration Instructions User Name and Password Page Standard Product Agreement xiv xv xvi xvii Page Topspin 360 Overview Features Performance Unified Fabric Transparent Topology Redundancy and High-Availability Scalability Page Topspin 360 Components Controller Cards Install a Controller Card Page Page Ethernet and Fibre Channel Gateways Replacing and Updating Your Gateways Install an Ethernet or Fibre Channel Gateway InfiniBand Switch Cards Install InfiniBand Switch Cards Page Remove InfiniBand Switch Cards Power Supply Modules Install Power Supply Modules Removing a Power Supply Blower Trays Install Blower Trays Page Page Page Install and Boot the Topspin 360 Prepare the Site for the Topspin 360 Read the Cautionary Statements Prepare the Physical Environment for the Topspin 360 Install Topspin 360 Components Rack the Topspin 360 Page Page Page Page Page Attach a Serial Console Cable to a PC or Terminal Boot your Topspin 360 and Configure Basic Connectivity Assign a Static IP Address Obtain an IP Address with DHCP Connect InfiniBand Hosts Page Page Manage the Topspin 360 Viewing and Updating the Software Image on the Chassis View the Software Image Version with the CLI View the Software Image Version with the GUI Upgrade the Software Image with the CLI Upgrade the Software Image with the GUI Page Delete an Image with the CLI Delete an Image with the GUI Page Topspin 360 Field Replaceable Units Controller Cards Expansion Modules InfiniBand Switch Cards Installing an InfiniBand Switch Card Configuring a New InfiniBand Switch Card The keyword all (The CLI defaults to all if you enter just show card). 2. Update the switch card firmware. Enter the install command: Removing an InfiniBand Switch Card Power Modules Installing a Power Supply Removing a Power Supply Page Removing a Blower Tray Page Topspin 360 LEDs Topspin 360 System LED Power Supply LEDs Blower Tray LEDs Controller Card LEDs IB Switch Card LEDs IB Port LEDs Fibre Channel Gateway LEDs FC Port LEDs Ethernet Gateway LEDs Ethernet Port LEDs Specifications and Compliance General Specifications Electrical Specifications Certifications/Regulatory Laser Specs