ix

CAUTION: Use only Topspin-approved gateway expansion modules, controller cards, fans, and power
supply modules.
CAUTION: Never place your hand inside an empty card or module bay. You should never have cause
to place a hand anywhere inside the Topspin chassis. Unused card and module bays should always have
a Topspin cover over the bay to ensure proper safety, ventilation, and cooling.
CAUTION: The Topspin 360 contains hot-swappable controller, fan/blower tray, switch controller,
power supply, and gateway expansion modules. The operator may swap these components while power
is still applied to the Topspin 360.
General Cautions
CAUTION: No user is authorized to remove the Topspin 360 enclosure cover. The internal chassis
contains no user-serviceable components. Removing the enclosure cover voids your warranty. See the
warranty card for further details regarding the servicing of your chassis.
CAUTION: Opening and/or modifying expansion and system modules may void your warranty. Refer
to your warranty to determine access restrictions.
In general
• Do not spill food or liquids on your Topspin 360 components.
• Protect your Topspin 360 from sudden power-surges and interruptions by using a surge suppressor,
line conditioner, or uninterruptable power supply (UPS).
• Place cables appropriately so that they do not obstruct any egress within the data center and they do
not block any ventilation inlets or outlets.
• Rack mount the Topspin chassis according to the rack manufacturer recommendations.
CAUTION: Installing the Topspin 360 into a rack is a 3-person process due to the weight and size of
the 4U unit.
Laser Cautions
CAUTION: Only qualified service technicians should repair laser devices.