viii

CAUTION: Grounding is supplied by the ground-prong on the 3-prong power cable. Do not attach a separate ground cable. Do not use adapter plugs. Do not remove the ground prong from the cable. Ensure the ground connection on the power supply is correct and functioning before applying power to the Topspin 360.

CAUTION: Always ground yourself before touching any internal Topspin 360 component to avoid damage from electrostatic discharge (ESD).

CAUTION: The Topspin 360 has two power cables. The operator must disconnect all power cables before attempting to remove the Topspin 360 from the rack.

CAUTION: Remove power cables by grasping the cable connector and pulling straight out.If the chassis comes equipped with a power-plug retainer, move the bail wire used to retain the plug to the side before attempting to remove the power plug. To replace power-supply cables, grasp the cable connector, align the connector with the power jack, and insert the connector straight into the jack. If the chassis comes equipped with a power-plug retainer, move the bail wire back into place to keep the power plug firmly in place.

CAUTION: The Topspin 360 contains lithium batteries. Do not attempt to replace or discard these batteries. The batteries may only be serviced by Topspin service personnel.

CAUTION: Observe and follow service markings. Do not service the Topspin 360, except as explained in the Topspin documentation supplied with your Topspin 360. Opening the chassis or removing the enclosure cover exposes you to electrical shock and may damage Topspin 360 components.

If one or more of the following situations occurs, remove power to the Topspin 360 and contact your

Topspin support representative:

The power cable or power plug is damaged.

The Topspin 360 has been exposed to water.

The Topspin 360 has been dropped or damaged in any way.

The Topspin 360 does not operate correctly after following the installation instructions.

CAUTION: You must ensure the operating environment has adequate air circulation. Keep the Topspin 360 in a cool, well-ventilated room. Do not block cooling vents. Install filler panels into all unused slots.

Page 8
Image 8
Cisco Systems SFS 3012 manual Viii

SFS 3012 specifications

Cisco Systems SFS 3012 is a network switch designed to enhance the performance of data centers and enterprise networks. With its innovative architecture and advanced features, it caters to the increasing demands for high bandwidth and low-latency networking environments. This model leverages Cisco's expertise in networking technology to deliver reliable and scalable solutions for organizations.

One of the main features of the SFS 3012 is its ability to support high-speed data transfer with 10 Gigabit Ethernet (10GbE) ports. This provides significant improvement in data throughput, enabling faster communication between servers and network devices. With twelve 10GbE ports, the SFS 3012 is capable of handling intensive workloads, making it ideal for cloud computing and big data applications.

The SFS 3012 employs various networking technologies that enhance its operational efficiency. It supports data center bridging (DCB), which optimizes traffic flow and ensures low-latency communication for storage and server traffic. This feature is particularly beneficial in virtualization environments where multiple virtual machines operate simultaneously.

Additionally, the switch utilizes Cisco's innovative virtual extensible LAN (VXLAN) technology, enabling the creation of scalable, isolated virtual networks. This is crucial for enhancing network segmentation and security in multi-tenant data center environments. The ability to create virtual networks without the constraint of physical boundaries allows organizations to scale their networks seamlessly according to their needs.

Security is another critical characteristic of the SFS 3012. It implements advanced security protocols to protect the integrity of data transmissions. Features such as access control lists (ACLs), port security, and authentication protocols help safeguard sensitive information from unauthorized access.

Moreover, the SFS 3012 is designed with energy efficiency in mind. It incorporates features that minimize power consumption, helping organizations reduce their operational costs while also supporting sustainability initiatives.

In conclusion, the Cisco Systems SFS 3012 is a powerful network switch ideal for modern, demanding networking environments. With its high-speed connectivity, advanced networking features, strong security measures, and energy efficiency, it provides an effective solution for organizations looking to enhance their infrastructure and performance. As businesses increasingly embrace digital transformation, devices like the SFS 3012 will play a crucial role in supporting their growth and innovation.