Cisco SG100D-08 Unmanaged Gigabit Switch Quick Start Guide 6
STEP 3Insert a screw into each hole, leaving a gap between the surface
and the base of the screw head of at least 0.1 inches (3mm).
STEP 4Place the unmanaged switch wall-mount slots over the screws and
slide the unmanaged switch down until the screws fit snugly into
the wall-mount slots.
STEP 5Connect the unmanaged switch to the other devices, as described
in the “Connecting the Equipment” section.
Flat Surface Installation
To deploy the device on a desktop or other flat surface:
STEP 1Place the unmanaged switch on a desktop near an AC power
source.
STEP 2Connect the unmanaged switch to the other devices, as described
in the “Connecting the Equipment” section.