New and Changed Information
A Cisco SN 5428 Storage Router running software release 3.5.3 or later is also interoperable with an IP host running Microsoft Windows® 2000, Microsoft Windows XP, or Microsoft Windows Server™ 2003 and the Microsoft iSCSI Software Initiator package, version 1.03 or higher. You can download the Microsoft iSCSI Software Initiator package, which includes the Microsoft iSCSI initiator service and the Microsoft iSCSI Initiator software driver, from http://www.microsoft.com/windowsserversystem/storage/technologies/iscsi/default.mspx.
Interoperability Information
SN 5428 interoperability information is available on Cisco.com. You can access the interoperability matrix by following these instructions:
Step 1 At http://www.cisco.com, click Products & Solutions, and select Storage Networking and SN 5400 Series Storage Routers from the menu.
Step 2 At the Cisco Storage Networking Products web page, click the Cisco SN 5400 Series Storage Routers link.
Step 3 At the Cisco SN 5400 Series Storage Routers web page, click Technical Documentation from the navigation menu on the left side of the page.
Step 4 Click the Tech Notes link, and then click the Cisco SN 5428 and SN
LUN Trespass Feature
The SN 5428 LUN trespass feature provides LUN failover capability for selected storage arrays that operate on the active/passive port model.The trespass feature has been tested with the following storage arrays:
•EMC Clarion 4500/4700
•EMC Clarion Cx400
•HP MSA1000, with firmware version 4.24
New and Changed Information
This section describes new and changed features in Release 3.5.1, and includes the following information:
•New CLI Commands, page 6
•New and Changed GUI Functionality, page 6
Release Notes for Cisco SN 5428 Storage Router Release 3.5.3
| 5 |
| |
|
|
