|
|
|
|
|
|
| Controlling the Multiple Product | ||
|
|
|
|
|
Transmission / Receiving Protocol
27.H-Position (Command : f q)
► To set the Horizontal position
Transmission
[f][q][][Set ID][][Data][Cr]
* The data range is from 00 to 64(in Hex)
28.V-Position (Command : f r)
► To set the Vertical position.
Transmission
[f][r][][Set ID][][Data][Cr]
* The data range is from 00 to 64(in Hex)
29.Serial No.(Command : f y)
► To read the serial numbers.
Transmission
[f][y][][Set ID][][Data][Cr]
Data FF (to read the serial numbers)
30.S/W Version(Command : f z)
► Check the software version.
Transmission
[f][z][][Set ID][][Data][Cr]
Data FFH : Read
31.Product Type(Command : f v)
► Check the product type.
Transmission
[f][v][][Set ID][][Data][Cr]
Data FFH : Read
32.Model Name(Command : f w)
► Check the model name.
Transmission
[f][w][][Set ID][][Data][Cr]
Data FFH : Read
Acknowledgement
[q][][Set ID][][OK/NG][Data][x]
Acknowledgement
[r][][Set ID][][OK/NG][Data][x]
Acknowledgement
[y][][Set ID][][OK/NG][Data][x]
Acknowledgement
[z][][Set ID][][OK/NG][Data][x]
Acknowledgement
[v][][Set ID][][OK/NG][Data][x]
Acknowledgement
[w][][Set ID][][OK/NG][Data][x]
A11
