LG Electronics M3801S, M2901S Controlling the Multiple Product, RS-232C, Abnomal stateCommand k z

RS-232C Controlling the Multiple Product

Transmission / Receiving Protocol

11.Color Temperature User-Green Adjust(Command : k w)

► To adjust the screen user green color temperature.

Transmission Acknowledgement

[k][w][][Set ID][][Data][Cr]

Data Min : 00 to Max : 3c

* Real data mapping 00 : -30, .... , 1e : 0, ...., 3c : 30

[w][][Set ID][OK][Data][x]

12.Color Temperature User-Blue Adjust(Command : k $)

► To adjust the screen user Blue color temperature.

Transmission Acknowledgement

[k][$][][Set ID][][Data][Cr]

Data Min : 00 to Max : 3c

* Real data mapping 00 : -30, .... , 1e : 0, ...., 3c : 30

[$][][Set ID][OK][Data][x]

13. Abnomal state(Command : k z)

► Abnormal State : Used to Read the power off status when Stand-by mode.

Transmission Acknowledgement

[k][z][][Set ID][][Data][Cr]

Data FF : Read

00 : Normal (Power on and signal exist)

01 : No signal

02 : Turn the monitor off by remote control

03 : Turn the monitor off by sleep time function

04 : Turn the monitor off by RS-232C function

08 : Turn the monitor off by off time function

09 : Turn the monitor off by auto sleep function

[z][][Set ID][OK][Data][x]

14. Auto Configuration(Command: j u)

► To adjust picture position and minimize image shaking automatically. it works only in RGB(PC) mode.

Transmission Acknowledgement

[j][u][][Set ID][][Data][Cr]

Data 01 : To set

15.Lamp fault Check(Command : d p)

► To check lamp fault.

Transmission

[d][p][][Set ID][][Data][Cr]

* The data is always FF(in Hex).

[u][][Set ID][OK][Data][x]

Acknowledgement

[p][][Set ID][OK][Data][x]

Data 00 : Lamp Fault 01: Lamp OK

A6