RS-232C Controlling the Multiple Product
Transmission / Receiving Protocol
01. Power(Command : a)
► To control Power On / Off of the Set.
Transmission | Acknowledgement |
[k][a][][Set ID][][Data][Cr]
Data 00 : Power Off
►To show the status of Power On / Off. Transmission
[a][][Set ID][][OK][Data][x]
01 : Power On
Acknowledgement
[k][a][][Set ID][][Data][Cr]
Data : FF
[a][][Set ID][][OK][Data][x]
Data 00 : Power Off 01 : Power On 09 : DPM
02.Input Select(Command : k b)(Main Picture Input)
► To select input source for the Set.
You can also select an input source using the INPUT button on the remote control.
Transmission
[k][b][][Set ID][][Data][Cr]
Data 07 : RGB(PC) 09 : HDMI(PC)
Acknowledgement
[b][][Set ID][OK][Data][x]
03.Input Select(Command : x b)
► To select input source foe the Set.
Transmission
[x][b][][Set ID][][Data][Cr]
Data 60 : RGB(PC) a0 : HDMI(PC)
Acknowledgement
[b][][Set ID][OK][Data][x]
04.Aspect Ratio(Command : k c) (Main picture format)
► To adjust the screen format.
You can also adjust the screen format using the ARC(Aspect Ratio Control) button on remote control or in the Screen menu.
Transmission
[k][c][][Set ID][][Data][Cr]
Data 0a : Top 0b : Bottom 0c : Stretch
Acknowledgement
[c][][Set ID][OK][Data][x]
05.Contrast(Command : k g)
► To adjust screen contrast.
You can also adjust the contrast in the Picture menu.
Transmission | Acknowledgement |
[k][g][][Set ID][][Data][Cr]
[g][][Set ID][OK][Data][x]
Data Min : 00 to Max : 64
*Real data mapping 0 : step 0, ...., a : step 10, ...., 64 : step 100 A4
