LG Electronics M2901S, M3801S Selecting the UTILITY, User Menus, Set ID, Program, Power Indicator

User Menus

Selecting the UTILITY

		UTILITY
		Set ID		1
		Power Indicator		On
		DPM Select		Off
		Pixel Shift		Off
		Network Setup		>
		Factory Reset		>
		◄► Move	▼▲ Select		MENU	Back
Set ID	You can assign a unique Set ID NO (name assignment) to each product when several
	products are connected for display. Specify the number (1 to 99) using the ◄ ► button and
	exit. Use the assigned Set ID to individually control each product using the Product Control
	Program.
Power Indicator	Use the function to the set power indicator on the front side of the product to On or Off.
DPM Select	A user can choose to turn the power saving mode on/off.
Pixel Shift	A user can choose to turn function.
Network Setup	Setup network information.
		NETWORK SETUP
		Network Select		LAN
		DHCP		>
		Manual		>

◄► Move ▼▲ Select		Back
	MENU

•Network Select : Sets up network connections.

-RS-232 : Enable communication via Serial.

-LAN : Enable communication via Ethernet.

•DHCP : Allocates and sets up IP automatically.

•Manual : Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary DNS. The setup process is complete when you select Execute, and "IP Setup Completed" is displayed at the bottom of the screen. While "Wait for IP Setup" is displayed, you cannot use the local keys and remote control. "Wait for IP Setup" is displayed for up to 40seconds.

18