NETGEAR RT328 manual You must configure the parameters to activate syslog Table

Sysmaint.fm Page 5 Tuesday, October 10, 2000 3:26 PM

Reference Guide for the Model RT328 and Model RH348 ISDN Routers

You must configure the parameters to activate syslog (Table 9-4).

Table 9-4. System Maintenance - Syslog and Accounting Menu Fields

Field	Command	Description
Active	Press the space bar to toggle between	The syslog option is turned on or off.
	yes and no.
Syslog IP Address	Enter the address in dotted-decimal	This field is the IP address location to
	notation such as a.b.c.d where a, b, c,	send your syslog.
	and d are numbers between 0 and 255.
Log Facility	Press the space bar to toggle between	Seven different local options can be
	on and off.	selected. This feature is used for UNIX
		applications.

The router sends three different types of syslog messages:

•Call information messages (CDR)

•Error information messages

•Session information messages

Examples of these messages are as follows:

•Call Information Messages:

line 1 channel 1, call 41, C01, Incoming Call, 40001

line 1 channel 1, call 41, C01, ANSWER Connected, 64K 40001 line 1 channel 1, call 41, C01, Incoming Call, Call Terminated

•Error Information Messages:

line 1, channel 1, call 44, E01, CLID call refuse line 1, channel 1, call 45, E02, IP address mismatch

•Session Information Messages:

line 1, channel 1, call 41, I01, IPCP up, 306L line 1, channel 1, call 41, I01, IPCP down, 306L

System Maintenance 9-5