NETGEAR RT328 manual Dial-In Users Setup

Dialin.fm Page 4 Tuesday, October 10, 2000 3:20 PM

Reference Guide for the Model RT328 and Model RH348 ISDN Routers

Table 6-1.	Fields in Menu 13 - Default Dial-in Setup (continued)
Field		Description
Session Options:
Input Filter Sets and		In these fields, you can select the filter set(s) to filter the incoming and
Output Filter Sets		outgoing traffic between your router and the remote dial-in user. These
		filter set(s) apply to all remote dial-in users but not the remote nodes.
		You can choose from 12 different filter sets. In addition, you can link up
		to 4 filter sets together for further customization (For example, 1, 5, 9, 12).
		Spaces and commas ( , ) are accepted in this field. For more information
		about customizing your filter sets, see Chapter 8, “Filter Configuration.”
		The default is blank (no filters).
Idle Timeout		This value is the number of idle seconds that elapse before the dial-in user
		is automatically disconnected. Idle timeout is the period of time when
		there is no data traffic between the dial-in user or remote node and the
		router. This field is used only if the Recv. Authen is set to None and the
		call is not mapped to any remote node or remote dial-in user or the router
		calls back to the remote dial-in user.

Dial-In Users Setup

To add a remote dial-in user, enter 14 from the main menu to display Dial-in User Setup.

To edit user parameters, select one of the eight users to go to the Edit Dial-in User menu.

When you have completed filling in Menu 14.1 - Edit Dial-in User, press [Enter] at the Press ENTER to Confirm... prompt to save your selections. You can press [Esc] at any time to cancel your selections.

6-4 Dial-In Configuration