Cisco Systems SPA2102 manual For Windows 98 and Millennium, Phone Adapter with Router

Models: SPA2102

1 96
Download 96 pages 45.88 Kb
Page 54
Image 54

Phone Adapter with Router

C.Click Tools. Click Internet Options. Click the Security tab. Click the Default level button. Make sure the security level is Medium or lower. Then click the OK button.

3.I need to set a static IP address on a PC.

The Phone Adapter, by default, assigns an IP address range of 192.168.0.100 to 192.168.0.150 using the DHCP server on the Phone Adapter. To set a static IP address, you can only use the ranges 192.168.0.2 to 192.168.0.99 and 192.168.0.151 to 192.168.0.254. Each PC or network device that uses TCP/IP must have a unique address to identify itself in a network. If the IP address is not unique to a network, Windows will generate an IP conflict error message. You can assign a static IP address to a PC by performing the following steps:

For Windows 98 and Millennium:

A.

Click Start, Setting, and Control Panel. Double-click Network.

B.

In The following network components are installed box, select the TCP/IP-> associated with your

 

Ethernet adapter. If you only have one Ethernet adapter installed, you will only see one TCP/IP line with

 

no association to an Ethernet adapter. Highlight it and click the Properties button.

C.

In the TCP/IP properties window, select the IP address tab, and select Specify an IP address. Enter a

 

unique IP address that is not used by any other computer on the network connected to the Phone

 

Adapter. You can only use an IP address in the ranges 192.168.0.2 to 192.168.0.99 and 192.168.0.151 to

 

192.168.0.254. Make sure that each IP address is unique for each PC or network device.

D.

Click the Gateway tab, and in the New Gateway prompt, enter 192.168.0.1, which is the default IP

 

address of the Phone Adapter. Click the Add button to accept the entry.

E.

Click the DNS tab, and make sure the DNS Enabled option is selected. Enter the Host and Domain

 

names (e.g., John for Host and home for Domain). Enter the DNS entry provided by your ISP. If your ISP

 

has not provided the DNS IP address, contact your ISP to get that information or go to its website for the

 

information.

F.

Click the OK button in the TCP/IP properties window, and click Close or OK for the Network window.

G.

Restart the computer when asked.

46

Appendix A: Troubleshooting

 

Common Problems and Solutions

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030

Page 54
Image 54
Cisco Systems SPA2102 For Windows 98 and Millennium, Phone Adapter with Router, I need to set a static IP address on a PC