Cisco Systems SPA2102 manual I need to set up a server behind my Phone Adapter

Models: SPA2102

1 96
Download 96 pages 45.88 Kb
Page 59
Image 59

E.Make sure the cable connecting from your cable or DSL modem is connected to the Phone Adapter’s Internet port. Verify that the Router - Status page of the Phone Adapter’s Web-based Utility shows a valid IP address from your ISP.

F.Turn off the computer, Phone Adapter, and cable/DSL modem. Wait 30 seconds, and then turn on the Phone Adapter, cable/DSL modem, and computer. Check the Router - Status page of the Phone Adapter’s Web-based Utility to see if you get an IP address.

6.I am not able to access the Phone Adapter’s Web-based Utility Setup page.

A.Refer to “Problem #4, I want to test my Internet connection” to verify that your computer is properly connected to the Phone Adapter.

B.Refer to “Appendix B: Finding the MAC Address and IP Address for Your Ethernet Adapter” to verify that your computer has an IP Address, Subnet Mask, Gateway, and DNS.

C.Set a static IP address on your system; refer to “Problem #3: I need to set a static IP address on a PC.”

D.Refer to “Problem #10: I am a PPPoE user, and I need to remove the proxy settings or the dial-up pop-up window.”

7.I need to set up a server behind my Phone Adapter.

To use a server like a web, ftp, or mail server, you need to know the respective port numbers they are using. For example, port 80 (HTTP) is used for web; port 21 (FTP) is used for FTP, and port 25 (SMTP outgoing) and port 110 (POP3 incoming) are used for the mail server. You can get more information by viewing the documentation provided with the server you installed. Follow these steps to set up port forwarding through the Phone Adapter’s Web-based Utility. We will be setting up web, ftp, and mail servers.

A.Access the Phone Adapter’s Web-based Utility by going to http://192.168.0.1 or the IP address of the Phone Adapter. Go to the Router => Application tab.

B.Select yes from the Enable drop-down menu.

C.Enter any name you want to use for the service.

Appendix A: Troubleshooting

Common Problems and Solutions

Phone Adapter with Router

51

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030

Page 59
Image 59
Cisco Systems SPA2102 I need to set up a server behind my Phone Adapter, B. Select yes from the Enable drop-down menu