Manuals / Cisco Systems / Computer Equipment / Network Card

Cisco Systems SPA2102 Enable, Service Name, Starting and, Protocol, IP Address, Ending Ports

Models: SPA2102

1 96

Download 96 pages 45.88 Kb

Page 60

Phone Adapter with Router

D.Enter the port range of the service you are using. For example, if you have a web server, you would enter the range 80 (in the Starting Port field) to 80 (in the Ending Port field).

E.Select the protocol you will be using, TCP or UDP, or select Both.

F.Enter the IP address of the PC or network device that you want the port server to go to. For example, if the web server’s Ethernet adapter IP address is 192.168.0.100, you would enter 100 in the field provided. Check “Appendix B: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting an IP address.

G.Follow the instructions in steps B-F for the port services you want to use. Consider the examples below:

Enable	Service Name	Starting and	Protocol	IP Address
		Ending Ports

yes	Web server	80 to 80	Both	192.168.0.100

yes	FTP server	21 to 21	TCP	192.168.0.101

yes	SMTP (outgoing)	25 to 25	Both	192.168.0.102

yes	POP3 (incoming)	110 to 110	Both	192.168.0.102

When you have completed the configuration, click the Submit All Changes button.

8.I need to set up online game hosting or use other Internet applications.

If you want to play online games or use Internet applications, most will work without doing any port forwarding or DMZ hosting. There may be cases when you want to host an online game or Internet application. This would require you to set up the Phone Adapter to deliver incoming packets or data to a specific computer. This also applies to the Internet applications you are using. The best way to get the

52	Appendix A: Troubleshooting
	Common Problems and Solutions

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030

Image 60

Cisco Systems SPA2102 Enable, Service Name, Starting and, Protocol, IP Address, Ending Ports, Phone Adapter with Router

Contents

Phone Adapter with Router User GuideVoice Model No. SPA2102Page How to Use this Guide Copyright and TrademarksPhone Adapter with Router word definitionPhone Adapter with Router Table of Contents Chapter 6 Using the Web-based UtilityChapter 1 Introduction Chapter 2 Networking BasicsAppendix A Troubleshooting Appendix E SpecificationsAppendix F Warranty Information Appendix C Windows HelpList of Figures Figure 6-12 Speed Dial and Supplementary Service Settings Figure 6-13 Distinctive Ring and Ring SettingsFigure B-1 IP Configuration Screen Figure 6-11 Voice - User 1 ScreenChapter 1 Introduction WelcomePhone Adapter with Router What’s in this Guide? Phone Adapter with RouterAppendix A Troubleshooting Phone Adapter with RouterPhone Adapter with Router Chapter 1 IntroductionWhat’s in this Guide? Chapter 2 Networking Basics An Introduction to Local Area NetworksThe Use of IP Addresses Phone Adapter with RouterPhone Adapter with Router Chapter 2 Networking BasicsThe Use of IP Addresses dynamic ip address a temporary IP address assigned by a DHCP serverChapter 3 Getting to Know the Phone Adapter Phone Adapter with Router The Back PanelThe Front Panel Phone Adapter with RouterProceed to “Chapter 4 Getting Started.” Chapter 3 Getting to Know the Phone AdapterConnecting the Phone Adapter Chapter 4 Getting StartedBefore You Begin Phone Adapter with Router6. Power on the broadband modem Figure 4-2 Connect a PC Phone Adapter with RouterConfiguring the Phone Adapter Phone Adapter with RouterPhone Adapter with Router subnet mask an address code that determines the size of the networkPlacing the Phone Adapter Wall-Mount OptionPhone Adapter with Router Phone Adapter with Router Chapter 4 Getting StartedPlacing the Phone Adapter Chapter 5 Using the Interactive Voice Response Menu Accessing the Interactive Voice Response MenuOverview Phone Adapter with RouterUsing the Interactive Voice Response Menu Chapter 5 Using the Interactive Voice Response MenuUsing the Interactive Voice Response Menu Phone Adapter with RouterCommand Chapter 5 Using the Interactive Voice Response MenuInteractive Voice Response Menu Phone Adapter with RouterChapter 5 Using the Interactive Voice Response Menu Using the Interactive Voice Response Menuusing. Refer to the documentation supplied Enter the IP address usingChapter 5 Using the Interactive Voice Response Menu Using the Interactive Voice Response MenuInteractive Voice Response Menu Phone Adapter with RouterChapter 5 Using the Interactive Voice Response Menu Using the Interactive Voice Response MenuUse this setting to enable or disable WAN Phone Adapter with RouterEntering a Password Phone Adapter with Routerenter 1 to confirm. You will hear, “Option Configuring the Settings for Your Internet Phone Service Phone Adapter with RouterChapter 6 Using the Web-based Utility OverviewRouter Phone Adapter with RouterHow to Access the Web-based Utility VoicePhone Adapter with Router The Router Tab The Router - Status ScreenPhone Adapter with Router Phone Adapter with Router Host Name. Displayed here is the host name of the Phone Adapterip internet protocol a protocol used to send data over a network packet a unit of data sent over a networkThe Router - WAN Setup Screen Internet Connection SettingsStatic IP Settings PPPoE SettingsOptional Settings MAC Clone SettingsQOS Settings Remote ManagementVLAN Virtual Local Area Network Settings Phone Adapter with RouterThe Router - LAN Setup Screen LAN Network SettingsStatic DHCP Lease Settings Phone Adapter with RouterChapter 6 Using the Web-based Utility The Router Tab Phone Adapter with RouterPort Forwarding Settings DMZ SettingsThe Router - Application Screen Phone Adapter with RouterMiscellaneous Settings System Reserved Ports RangePhone Adapter with Router The Voice Tab The Voice - Info ScreenPhone Adapter with Router Line 1/2 Status Phone Adapter with RouterPhone Adapter with Router Last Called Number. Displayed here is the last number calledPhone Adapter with Router Call 1/2 Bytes Recv. Displayed here is the number of bytes receivedSystem Configuration The Voice - System ScreenPhone Adapter with Router Call Forward Settings Selective Call Forward SettingsThe Voice - User 1/2 Screen Phone Adapter with RouterPhone Adapter with Router Forward Last activation code is usedSpeed Dial Settings Supplementary Service SettingsPhone Adapter with Router Distinctive Ring Settings Ring SettingsPhone Adapter with Router Phone Adapter with Router Chapter 6 Using the Web-based Utility Phone Adapter with RouterThe Voice Tab Appendix A Troubleshooting Common Problems and SolutionsInstead, I see a screen saying, “404 Forbidden.” Phone Adapter with RouterFor Windows 98 and Millennium Phone Adapter with Router3. I need to set a static IP address on a PC For Windows For Windows XPPhone Adapter with Router Phone Adapter with Router F. Enter the Subnet Mask4. I want to test my Internet connection For Windows XP Phone Adapter with RouterPhone Adapter with Router If you get a reply, the computer is connected to the Phone Adapter7. I need to set up a server behind my Phone Adapter B. Select yes from the Enable drop-down menuPhone Adapter with Router Enable Service NameStarting and ProtocolEnable Service NameStarting and ProtocolPhone Adapter with Router 9. I can’t get the Internet game, server, or application to workFor Microsoft Internet Explorer 5.0 or higher For Netscape 4.7 or higherPhone Adapter with Router Frequently Asked Questions Where is the Phone Adapter installed on the network?What is Network Address Translation and what is it used for? Phone Adapter with RouterDoes the Phone Adapter support ICQ send file? How do I get Half-Life Team Fortress to work with the Phone Adapter?Phone Adapter with Router Phone Adapter with Router How can I block corrupted FTP downloads?Will the Phone Adapter function in a Macintosh environment? Navigator 5.0 or higher for MacintoshWhat is DMZ Hosting? How do I reset the Phone Adapter?Is the Phone Adapter cross-platform compatible? Which modems are compatible with the Phone Adapter?Appendix A Troubleshooting Frequently Asked QuestionsPhone Adapter with Router Windows 98 or Me Instructions AppendixBFindingtheMACAddressandIPAddressforYour Ethernet AdapterPhone Adapter with Router Windows 2000 or XP Instructions For the Phone Adapter’s Web-based UtilityPhone Adapter with Router Appendix C Windows Help TCP/IPShared Resources Network Neighborhood/My Network PlacesPhone Adapter with Router Appendix C Windows HelpAppendix D Glossary Phone Adapter with RouterAppendix D Glossary Phone Adapter with Router Domain - A specific name for a network of computersPhone Adapter with Router Packet - A unit of data sent over a networkAppendix D Glossary Phone Adapter with Router Static Routing - Forwarding data in a network via a fixed pathAppendix E Specifications Voice Gateway VMWI - Visual Message Waiting Indicator via FSK Subscriber Line Interface Unit Weight Appendix E Specifications5.29 oz. 0.15 kg Operating TempAppendix E Specifications Phone Adapter with RouterAppendix F Warranty Information Appendix F Warranty InformationPhone Adapter with Router Appendix F Warranty Information Phone Adapter with RouterPlease direct all inquiries to Linksys, P.O. Box 18558, Irvine, CA Appendix G Regulatory Information Phone Adapter with RouterFCC Statement Reorient or relocate the receiving antennaPhone Adapter with Router Industry Canada CanadaPhone Adapter with Router User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment WEEEPhone Adapter with Router Appendix G Regulatory InformationPhone Adapter with Router Appendix G Regulatory InformationPhone Adapter with Router Appendix G Regulatory InformationPhone Adapter with Router Appendix G Regulatory InformationPhone Adapter with Router Appendix G Regulatory InformationInternet Telephony Service Provider ITSP Appendix H Contact InformationLinksys Internet Telephony Service Provider ITSPPhone Adapter with Router Appendix H Contact InformationLinksys